makernax.blogg.se - Elna elnita sp manual

once screwed in, remove the pin and replace the top cover.

after 1~2 cm of spring is exposed on the top of the machine, place a pin horizontal to the spring to hold it in place and screw the screw (from step 4) onto the top of the spring.

Tie the bottom section of thread to the Bobbin Extractor Spring and gently pull the thread up.This will use the weight of the needle to pull the thread, making this step easier).

This is a PDF Down-load-able Manual that you can print yourself or take to your local Office Supply Store or Print Shop and let them print and bind it for you. It contains 29 pages of information on how to thread, maintain, and operate the machine. (Mechanic’s tip: Thread a needle and then drop the needle down the extractor hole. This instruction manual is for the Elna Model 255 Elnita Sewing Machine.

thread a piece of thread down through the extractor hole.

Unscrew the screw from the spring and set the screw aside.

Locate the screw on the top o the machine that holds the bobbin extractor spring in place and pull it up.

Remove old plastic extractor from the bobbin extractor spring.

Unscrew and remove the top cover of your machine. Results 1 - 20 of 45 Elna Stella SP Electronic Sewing Machine Instructions To Enlarge.

How to replace the Bobbin Extractor on an Elna Sewing Machine: